New Metal 3DP Systems
NIKON SLM SOLUTIONS unveiled a new family of metal laser powder-bed fusion systems designed for series production. MACHX is available in three build envelopes and combines up to 8 kW of laser power, changeover in just 25 minutes, and a compact footprint, so manufacturers can start with a single system and scale to a fleet on the same factory floor.
Metal additive manufacturing has long competed on speed. Now customers are asking how much a system produces for the floor space it occupies, how reliably it performs build after build, and how easily production can grow. MACHX is built around those questions, and around a measure Nikon SLM Solutions calls throughput density: how much a factory floor produces per square meter.
MACHX shares one architecture across three systems. The MACHX 450 offers a 450×450×450 mm build envelope for general industrial production. The MACHX 450C extends the Y axis to 450×600×450 mm for automotive and other long, flat parts. The MACHX 450E extends the Z axis to 450×450×1,000 mm for tall components such as rocket engine thrust chambers. Because the platform, software and process are shared, parameters and knowhow developed on one system carry across the family.
MACHX is designed to grow with production rather than be replaced by it. Customers can start with one system and add laser power, automation and further systems as demand increases. Laser and optics packages can be upgraded after purchase, and each module is validated independently, so a single unit can be serviced without taking the system out of production. With the optional cylinder exchange, the next cylinder is preheated outside the build chamber while the current job runs. Nikon layer-surface monitoring technology then levels the platform and verifies the first powder layer automatically, so the next build starts just 25 minutes after the last one finishes. Interfaces for automated material handling and shared de-powdering allow several systems to work as one production cell, and a 230 L Universal Powder Tank supports long, uninterrupted production runs.
MACHX is engineered for maximum output from a minimum footprint. The MACHX 450E places around 200 liters of build volume in approximately 13 m² of floor space. For manufacturers planning capacity, that means more parts from the floor they already have, and a fleet that can expand without a new building.
MACHX offers up to 8 kW of total laser power: four or eight 1 kW Gaussian lasers, or four 2 kW lasers with selectable beam-shaping options, so the energy can be matched to the material and the part. A new generation of optics, developed together by Nikon optical engineers and Nikon SLM Solutions engineers, controls up to 2 kW per laser. Zoom and defocus adjust the beam from 80 to 760 µm during the build, and advanced galvo control supports both productivity and part accuracy.
Higher laser power brings more heat into the process. MACHX uses interchangeable plate packages for different temperature regimes. The low-temperature package actively cools between 80 and 200 °C, with about eight times the cooling performance of previous systems, and a mid-temperature package covers 200 to 450 °C. Sensors under the build plate, a liquid-cooled process chamber and build part thermal conditioning ensure that every part on the plate sees the same thermal history.
MACHX is also the first platform for SLMX, Nikon SLM Solutions’ fully adaptive process ecosystem. SLMX brings together the thermal architecture, PanX simulation, build processing, optical tomography, advanced optics and process intelligence, so that performance on the first build carries through to the thousandth.
Learn more at www.nikonslmsolutions.com/slmsystems/xlaunch/
